Gemini Industries Printer user manual Paper and Ribbon

Paper and Ribbon

Figure 243. Feed the paper around the p/a ten (“roller’l) of the Gemini- 10X, then push the paper separator “downrightY(That’s the opposite of “upright”

-not to be confused with “downwrongl’)

13.Flip the clamp levers forward on the

sprocket mechanisms; adjust each mechanism (right and left) so that the sprockets (the nubby little “teeth” protruding from the sprocket wheel) align with the holes on the paper.

14.Adjust the sprockets so they are lined up with the sprocket holes.

15.Close the tractor covers and snap the clamp levers back into the “locked” position. (See Figure 2-10.)

16.Rotate the platen knob, and roll the paper up or down until the correct “print-start” position is obtained.

17.When the paper installation is completed, replace the printer cover and turn the power on.