Gemini User’s Manual
paper separator
guide
Figure 2-5. inserting roll paper in the Gemini printer is similar to inserting sing/e sheets, with accessories to accommodate the fact that the “sing/e-sheet” in this case is quite long.
9.Insert the roll paper into the paper chute, then push the paper through so it goes around the platen.
10.When the paper has been pushed through so it’s above the paper press, push the press back so it’s in its operational position (that is, flush against the paper).
11.Adjust the paper, if necessary, so it will feed through straight; then push the release lever back to the “locked” or “closed” position, marked with the letter “FI’
12.Lower the paper separator, as shown in Figure
-
-
20
