Paper and Ribbon

13.Rotate the platen knob and check to see if the roll paper is feeding smoothly.

If some adjustment is needed, pull the

.release lever forward to the “open” mode again, and adjust the placement of the paper before “closing” the release lever.

14.Set the print-start position to where you want to begin printing on the roll.

15.Turn the power switch to the “on” position.

Figure 2-6. After the roll paper has been inserted and the various mechanisms set in their proper places (steps 70- 12), you can turn the platen knob to adjust the roll paper vertically.

Note: If you encounter any problem finding suitable roll-paper supplies, contact your Gemini dealer.