-
Gem/n/ User’s Manual
A | “Back Pass” |
.
. “Bottom Pass” :
.
. loadlng :
Figure 2-13. Whether you use the “bottom pass” (shown here) or the “back pass” option (also shown), you start and end with the same steps.
13.Adjust the paper so that it will feed through straight, and push the paper press back to its operational position.
14.Horizontally adjust the sprocket mechanisms right or left so they align with the sprocket holes on the paper.
15.Vertically turn the sprocket “teeth” (the little nubs on the sprocket wheels) so they line up with the holes on the paper.
16.Snap the clamp levers back into the “closed” position.
30
