Gemini Industries Printer user manual Gemini-lox Loading Sprocket Paper

Gem/n/ User’s Manual

Gemini-lox Loading Sprocket Paper

The Gemini-lox should be loaded with sprocket-fed paper according to the following steps.

1. Turn the power switch “off?

2. Install the tractor unit.

3. Install the paper separator and paper guide, as described in Appendix G.

4. Pull the release lever, located on the left side of the printer, toward the “open” position (marked ‘IT”).

5. Lift up the paper press.

6. Pull the paper separator upright, as shown in Figure 2-8.

7. Place the stack of fanfolded computer paper behind the printer.

8. Pick up the top sheet of paper and feed it between the paper chute and the platen

cover, from the back side of the platen.

-

9.Push the paper down and forward, so it wraps around the platen.

10.Return the paper separator to its original position,

11.Open the tractor covers atop the right- and left-sprocket mechanisms, as shown in Figure 2-9.

12.Pull the paper up, past the sprocket mechanisms.

24