Holder C 9.92 H operating instructions Never turn the PTO on with the engine off

C 9.92	Operating Instructions
	Operating the attachments

- Push the push-pull rod in. 1

The PTO speed will be 1000 RPM at an engine speed of 2390 RPM.

ATTENTION

Never turn the PTO on with the engine off!

- Increase the engine speed to 1500-1800 RPM.

- Release the lock at the safety switch (1) and depress the switch. The front PTO is now turned on.

- To turn the PTO off, press the safety switch (1) up.

- If the PTO is no longer required, put the push-pull rod

(3) back to the neutral position.

2

DANGER

After the PTO is turned off, the installed at- tachment could continue to run. Wait until the attachment is stationary before working on it again.

Bild_C992H_093

3 Bild_S 990_007

153 146 101