Holder C 9.92 H Driving with SDS Special Drive System, Tractor must be stationary for switching

Operating Instructions			C 9.92
Operation
Driving with SDS (Special Drive System)*
	1	2	3

For the selection of the programs 1, 3 and 4 at the program switch (2) refer to the section on driving on pages 63 and 64.

Driving program 2 (SDS)

-Set the speed range knob (5) to range L.

ATTENTION

The tractor must be stationary for switching.

-Set the program switch (2) to range 2.

Bild_C992H_024

NOTE

In this range, the fine adjustment knob (1) is not operational. The control is assumed by the pedal (4).

-Set the engine RPM with the hand throttle (3).

-You can now control the ground speed steplessly with the pedal (4) (accelerator).

5

4

* Option

Bild_S 990_002

66 153 146