Operating Instructions

C 9.92

 

Operation

Driving

1

Driving with hydrostatic drive

 

-Start the engine.

-Preselect the direction of travel with the direction switch (1).

-Pull up the direction switch (1) and move it forward or backwards (forward or reverse).

NOTE

After the start of the engine, the direction switch must be operated once if it was in the forward or reverse position when starting.This feature is to prevent accidental movement of the vehicle when starting the engine.

NOTE

You can also reverse the direction of travel while driving at reduced speed.

CAUTION

The tractor will brake strongly and speed up again in the opposite direction.

Bild_C165

- Set the speed range knob (2) (at the steering column)

2

to the desired ground speed range:

 

ATTENTION

The tractor must be stationary for switching.

Bild_C992H_075

60

153 146

Page 62
Image 62
Holder C 9.92 H Operation, Driving with hydrostatic drive, Tractor must be stationary for switching