Holder C 9.92 H operating instructions Lubricating the universal joints

C 9.92	Operating Instructions
		Annual maintenance
Before doing work on the electrical equipment, cut off the
			1
power with the battery isolating switch (3).				2

-The switch must be in the vertical position and the toggle removed.

-Disconnect the battery ground lead (2).

-Disconnect the battery positive lead (1).

CAUTION
Do not place any metal parts on the battery
		3
poles. Risk of short circuit!
	Bild_C992H_091

-Coat the battery poles and battery terminals lightly with pole grease.

-Charge the battery and top up the electrolyte with distilled water.

Lubricating the universal joints

-Refer to page 204 of maintenance every 1000 service hours.

153 146 211