Holder C 9.92 H Operating the attachments, Additional information for attachments

Operating Instructions	C 9.92
Operating the attachments

Additional information for attachments

When installing attachments on the front and rear lift arms, do not exceed the permissible to- tal weight, the maximum allowable axle loads and tire carrying capacities of the tractor. The front axle of the tractor must always be loaded with at least 20 % of the tractor’s curb weight. Before purchasing any equipment, make sure these conditions are met by performing the fol- lowing calculations or by weighing the tractor- equipment combinations.

Determination of the total weight, axle loads and tire load capacity including minimum ballasting

For the calculation you need the following data:

a(m) Clearance between centre of gravity of front attachment/front ballast and centre of front axle 2) 3)

b. (m) Wheelbase of the tractor1) 3)

c(m) Distance between centre of rear axle and centre of lower link ball 1) 3)

d(m) Distance between centre

lower link ball and centre of gravity of rear attachment/rear ballast 2)

1)See the technical data in the operating instructions

2)See the price list and/or operating instructions of the attachment

3)Measure

T	(kg)	Curb weight of the tractor1)
L	(kg)	Front axle load of the empty tractor1)
T
V
TH	(kg)	Rear axle load of the empty tractor1)
GH (kg)		Total weight of
		rear attachment/rear ballast 2)
GV (kg)		Total weight of
		front attachment/front ballast 2)

Gv	TH
	Tv

a b c

GH

d

80 153 146