Holder C 9.92 H operating instructions Turn on the safety switch 6 only at low en- gine speed

Operating Instructions	C 9.92
Operating the attachments

ATTENTION 5 6

Turn on the safety switch (6) only at low en- gine speed.

-Turn the rotary knob (5) to 0.

-Release the lock at the safety switch (6) and depress the switch. The indicator in the switch will light.

ATTENTION

After the engine speed was increased, the oil flow may only be increased slowly.

-Turn the rotary knob (5) for setting the oil flow from 0 to 120 litres/min maximum to the desired rating for the attachment.

Bild_C992H_034

NOTE

The coded plug of the attachment will deter- mine the maximum oil flow rate for the re- lated attachment (for safety reasons).

The numerical value 11 on the ring corresponds to the maximum oil flow rate determined by the encoding.

106 153 146