C 9.92

Operating Instructions

Taking into service

 

Starting the engine with automatic preheating

Starting procedure

-Turn the ignition key to position 1.

-The engine will be preheated. At temperatures below +10°C the yellow lamp (2) and the preheating indicator light (1) will come on.

-When the yellow lamp (2) goes out, turn the ignition key to position 3 to start the engine.

-The automatic preheating will turn off some time after starting and the preheating indicator light (1) will go out.

NOTE

If the engine is not started, the preheating procedure will cease approx. 10 s after the yellow lamp (2) has gone out.

1

2

Bild_C288

 

Checking the brakes and steering for proper function

-Make a short trial run and check the steering and brakes for proper operation.

DANGER

Do not drive a vehicle with a defective steer- ing and/or braking system.

153 146

57

Page 59
Image 59
Holder C 9.92 H operating instructions Checking the brakes and steering for proper function