Holder C 9.92 H operating instructions Operation in winter

Operating Instructions	C 9.92
Special operating instructions
Operation in winter

Oil preheating*

Before starting the engine at temperatures below - 20 °C, turn on the heating element* to preheat the oil.

-Connect the preheating system plug to a 230 VAC outlet.

Observe the operating instructions of the manufacturer.

Putting on snow chains

Snow chains can be mounted on the tires to improve grip. In the following table you will find the order numbers for RUD chains which fit on the listed tires. You can also fit snow chains from other manufacturers if these have the proper dimensions.

Winter diesel fuel

Whenever temperatures fall below 0°C, use winter diesel or super diesel fuel or additives recommended in the mainte- nance instructions.

Engine oil for winter operation

Fill engine oil with a suitable SAE class as recommended in the maintenance instructions.

The cold start capability of the engine can be reduced if the temperature limits are underrun occasionally, but this will not damage the engine.

Hydraulic system

The hydraulic functions are sluggish and slower during cold temperatures. Bring the hydraulic system to operating tem- perature with some movements without a load.

* Option

Type of tire	Snow chain type (RUD
	Order No.)
10.5-18 MPT	24 553 and 24 553
400/60-15.5	22 177
33x12.50 R 15/33x12.5-15	22 167
33x15.50-15	22 174
31x15.50-15 Terra	22 548
36x13.5-15	24 178

Ballasting

The weight of the machine can be increased with ballast weights. The ballast weights must be applied parallel with the same weight on each axle and side.

78 153 146