Operating Instructions

C 9.92

Maintenance as required

 

ATTENTION

Carry out the services and inspections only with the engine turned off.

Checking the radiator, cleaning if necessary

- Inspect the cooling fins and oil cooler for the accumu- lation of dirt.

Cleaning with compressed air

-Raise the platform* and secure it against accidental

lowering.

Bild_C992H_063

-Blow out any dirt from the engine compartment to the

outside.

ATTENTION

 

Do not aim the water jet directly at sensitive

Cleaning with cold cleaner or water jet

parts such as the alternator, covering them if

necessary.

ATTENTION

- Run the engine warm to prevent the formation of rust.

Maximum spray pressure 60 bar, maximum

 

steam temperature 60 °C

 

-Raise the dumping subframe (dump body*) and secure it against accidental lowering.

-Spray the oil cooler and engine with a cold cleaner and allow it to soak in for 10 minutes.

-Clean the oil cooler and engine with a strong water jet.

188

153 146

Page 190
Image 190
Holder C 9.92 H operating instructions Checking the radiator, cleaning if necessary, Cleaning with compressed air