Holder C 9.92 H operating instructions Operating the rear lift

Operating Instructions	C 9.92
Operating the attachments

Operating the rear lift

The following movements are possible:

Turn on the working hydraulics master switch.

-Set the changeover lever (1) at the rear down to the „rear lift“ position.

-To raise the rear lift, press key (2) and pull the joy- stick (3) back.

• The rear lift (attachment) will be raised.

You can stop the movement by releasing the joystick.

-Press key (2) and push the joystick (3) forward.

• The rear lift (attachment) will be lowered.

The float position is turned on with the membrane key- board.

-To turn on, press key (4). The red LED indicator will come on.

•The float position of the rear lift is

turned on, ie the attachment can be moved by the

application of an external force.

-To turn off, press key (4). The red LED indicator will extinguish.

1 Bild_C992H_092

23

* Option 4 Bild_C213

96 153 146