Holder C 9.92 H Maintenance schedule, Maintenance during the initial period of operation, See

C 9.92 Operating Instructions

Maintenance schedule

Maintenance during the initial period of operation

Interval

Maintenance after the first 50 service hours

Service and inspection

Check the engine for leaks

Check the air tubes and air hoses for leaks

Check the heating hoses for damage and tightness Check the coolant level, top up if necessary Check the V-belt for tension and condition, tighten or replace belt if necessary

Cleaning the strainer in the fuel pump, replace if necessary Check the hydraulic lines and hoses for damage and tightness

Check the hydraulic oil level

Replace the working hydraulics pressure filter Replace the traction hydraulics pressure filter Change the front and rear gearbox oil Check the service brake

Check the parking brake for proper operation Tighten the wheel nuts (340 Nm)

Tighten nuts and bolts according to the torque table

See page

167

167

169

168

195

169

170

48

171

172

173

153 146 161