Holder C 9.92 H operating instructions Maintenance every 1000 service hours

Operating Instructions	C 9.92
Maintenance every 1000 service hours

Lubricating the universal joints (at least once a year)

-Turn the steering wheel right or left until the steering stop is met.

CAUTION

Carry out services in the articulated joint area only with the engine shut off.

-Remove the rubber protector.

-Adjust the top articulated shaft (1) by hand until the grease nipples are easily accessible.

-Grease the top articulated shaft.

-Move centre articulated shaft (2) with starter until grease nipples are easily accessible.

CAUTION

Never let anyone stand in the area of the articu- lated joint when the starter is being operated.

-Grease the middle articulated shaft.

-Adjust the lower articulated shaft (3) by moving the tractor forward or back until grease the nipples are easily accessible.

-Grease the lower articulated shaft.

-Refit the rubber protector at the articulated joint.

1

2

3

Bild_S 990_043

ATTENTION

Do not press in too much grease when lubri- cating the universal joints as this could dam- age the sealing.

204 153 146