Holder C 9.92 H operating instructions Maintenance schedule, Regular maintenance

Operating Instructions	C 9.92
Maintenance schedule

Interval

Maintenance after the first 500 service hours

Service and inspection

Clean the working hydraulics suction filter, replace if necessary Clean the suction filter for the traction hydraulics/attachment variable pump, replace if necessary

Replace the working hydraulics pressure filter Replace the traction hydraulics pressure filter Change the hydraulic oil

Checking the engine valve clearances

See page

181

181

171

172

180

The services and inspections specified below must be car- ried out when the stated number of service hours is reached. The services and inspections of the lower intervals must be carried out at the same time.

Example:

At 1000 hours of operation, the services and inspections for 500 and 250 service hours must also be carried out.

Regular maintenance

Interval	Service and inspection
Maintenance as required	Adjust the speedometer
	Check the air cleaner system, clean if necessary
	Replace the hydraulic return filter for attachment variable pump
	Replace the hydraulic return filter for hydraulic system
	Check the radiator, clean if necessary
	Check the air conditioner condenser for free flow of air, clean if necessary
	Clean the fresh air filter and filter mat, replace if necessary
	Grease the tractor (except universal joints)
	Check the frost protection of the windshield washer water

162 153 146