Holder C 9.92 H operating instructions Maintenance every 250 service hours

C 9.92	Operating Instructions
	Maintenance every 250 service hours

Checking the V-belt for tension and condi- tion, tightening or replacing if necessary

Please also refer to the operating instructions of the engine manufacturer.

CAUTION

Adjust V-belt tension only when the engine is shut off.

-Inspect V-belts for cracks and tears over their entire length.

-Replace any damaged V-belts.

-Using thumb pressure, check that belt deflection is not over 10 - 15 mm.

-To tighten the V-belt: Loosen the idler pulley mounting screws and push the pulley outwards until the proper V-belt tension is reached.

-Tighten the fastening screws of the idler pulley mounting.

153 146 195