Holder C 9.92 H Trailers, towing, Operating the trailer coupling, attaching trailers

Operating Instructions			C 9.92
Trailers, towing
Operating the trailer coupling, attaching trailers
	5	6

-Adjust the height of the trailer coupling (2) at the adjustment rail (1) so that the trailer tiller can be attached horizontally.

-To adjust the height, pull the lever (6) up.

Tongue weight
ATTENTION
The tongue weight must be at least 25 kg
(4 % of the trailing load), while the maximum
						4
tongue weight must not exceed 800 kg. If
the tongue weight is less or exceeded when
		1	2	3
unloading the trailer, the load must be shifted					Bild_105
so that the tongue weight returns to the per-	- Reverse the tractor until the trailer tongue is in the
missible range.
- Drive the tractor in front of the trailer to be attached.	coupling jaw. The coupling will close upon contact and
	the tow pin (3) will go through the eye in the trailer
DANGER	tongue.

The trailer must be secured against uninten-	DANGER
tional movement (rolling).
	The trailer coupling must close fully.

-Pull the release lever (4) up until the tow pin (3)

releases the coupling jaw.

DANGER

Never allow anyone to stand between the trac- tor and trailer.

-Connect the trailer lighting to the socket (5).

-Remove the wheel chocks from the trailer.

134 153 146