Holder C 9.92 H Maintenance every 500 service hours, Changing the engine oil at least once a year

C 9.92 Operating Instructions

Maintenance every 500 service hours

Changing the engine oil (at least once a year)

- Run the engine to operating temperature.

- Park the tractor on a level surface and switch off the engine.

- Place a suitable catch pan under the engine.

CAUTION
Danger of scalding when draining hot engine
oil.
- Unscrew the oil drain plug (1).	1

- Allow the oil to drain completely.

2

ATTENTION

Observe the instructions for handling fuel, flu- ids and lubricants.

-Screw the oil drain plug in again with a new sealing ring and tighten to a torque of 55 Nm.

-Fill new engine oil through the filler neck (2). Only use recommended engine oil.

Filling quantity with filter 10.5 L

-Let the engine idle for a short time.

-After approx. 1 minute, check the oil level with the

dipstick (3). 3

Bild_C992H_068

Bild_C992H_067

153 146 201