Holder C 9.92 H operating instructions 150

Operating Instructions			C 9.92
Malfunctions, causes, remedy
Malfunction	Cause	Remedy
Joystick inoperative	Joystick locked	Release with Opus or PC software
	Buttons defective	Determine fault with Opus, submit the
		joystick for repair, or replace it
Membrane keyboard inoperative	Mechanically or electrically	Determine fault with Opus or PC
	defective	software, replace membrane keyboard
		and/or related printed circuit board
Simultaneous failure of many joystick	Power supply interrupted	Determine and eliminate the defect
and membrane keyboard functions	(3 separate positive cables, pin 05,	(cable breakage, contact problems in
	23, 34)	the plug) Attention: Although voltage is
		applied in the quiescent state, power
		failure can result during operation
Functions operate too slowly or too	Flow rate limiting out of adjustment	Readjust with hash (#) key and joystick
fast		or Opus or PC software
	Current value for a certain channel	Adjust from 800 to 1900 mA in
	too low	"Channels" area with Opus or PC
		software
4th control level on joystick	Special function activated with	Push the asterisk (*) key again
"malfunctioning"	asterisk (*) key
Joystick or membrane keyboard not	Bus cable is defective (Opus does	Make a connection or replace the
functioning	not indicate a connection)	cable

150 153 146