Figure 112 Traps configuration
3.Select Enable SNMP Trap.
4.Click Apply to enable the SNMP trap function.
5.Click Add.
The page for adding a target host of SNMP traps appears. Figure 113 Adding a target host of SNMP traps
6.Configure the settings for the target host as described in Table 38.
7.Click Apply.
Table 38 Configuration items
Item | Description |
| Set the destination IP address. |
Destination IP Address | Select the IP address type: IPv4 or IPv6, and then type the corresponding IP |
| address in the field according to the IP address type. |
|
|
122