Item

 

Description

 

Port VLAN ID

Select the box to include the PVID TLV in transmitted LLDP frames.

 

 

 

 

 

Select the box to include port and protocol VLAN ID TLVs in

DOT1

Protocol VLAN ID

transmitted LLDP frames and specify the VLAN IDs to be advertised.

 

If no VLAN is specified, the lowest protocol VLAN ID is transmitted.

TLV

 

 

 

 

 

Setting

 

Select the box to include VLAN name TLVs in transmitted LLDP

 

VLAN Name

frames, and specify the VLAN IDs to be advertised.

 

If no VLAN is specified, the lowest VLAN carried on the port is

 

 

 

 

advertised.

 

 

 

 

Link Aggregation

Select the box to include the link aggregation TLV in transmitted

 

LLDP frames.

 

 

 

 

 

DOT3

MAC/PHY

Select the box to include the MAC/PHY configuration/status TLV in

Configuration/Status

transmitted LLDP frames.

TLV

 

 

 

Select the box to include the maximum frame size TLV in transmitted

Setting

Maximum Frame Size

 

LLDP frames.

 

 

 

Power via MDI

Select the box to include the power via MDI TLV and power stateful

 

control TLV in transmitted LLDP frames.

 

 

 

 

 

 

LLDP-MED

Select the box to include the LLDP-MED capabilities TLV in

 

Capabilities

transmitted LLDP frames.

 

 

 

 

 

Select the box to include the hardware revision TLV, firmware

 

Inventory

revision TLV, software revision TLV, serial number TLV,

 

manufacturer name TLV, model name TLV and asset ID TLV in

 

 

 

 

transmitted LLDP frames.

 

 

 

 

Network Policy

Select the box to include the network policy TLV in transmitted LLDP

 

frames.

 

 

 

 

 

 

Extended

Select the box to include the extended power-via-MDI TLV in

 

Power-via-MDI

 

transmitted LLDP frames.

 

Capability

 

 

 

 

 

MED TLV

 

Select the box to encode the emergency call number in the location

Emergency Number

identification TLV in transmitted LLDP frames and set the emergency

Setting

 

call number.

 

 

 

 

Address

Select Address to encode the civic address information of the

 

 

network connectivity device in the location identification TLV in

 

 

 

 

transmitted LLDP frames. In addition, set the device type (DHCP

 

 

server, switch, or LLDP-MED endpoint), country code, and network

 

 

device address.

 

 

When you configure the network device address, select the address

 

Network Device

information type from the list, enter the address information in the

 

Address

field below, and click Add next to the field to add the information to

 

 

the address information list below. To remove an address

 

 

information entry, select the entry from the list, and click Delete. The

 

 

civic address information can include language, province/state,

 

 

country, city, street, house number, name, postal/zip code, room

 

 

number, post office box, and, if necessary, additional information.

 

 

 

226