HP manual 23

Function menu			Description	User level
		Switch To	Switch the current user level to the management	Visitor
		Management	level.
	Loopback	Loopback	Perform loopback tests on Ethernet interfaces.	Configure
	VCT	VCT	Check the status of the cables connected to Ethernet	Configure
			ports.
	Flow	Port Traffic	Display the average rate at which the interface
			receives and sends packets within a specified time	Monitor
	Interval	Statistics
			interval.
		Statistics	Display, create, modify, and clear RMON	Configure
			statistics.
		History	Display, create, modify, and clear RMON history	Configure
			sampling information.
	RMON
		Alarm	Display, create, modify, and clear alarm entries.	Configure
		Event	Display, create, modify, and clear event entries.	Configure
		Log	Display log information about RMON events.	Configure
	Energy	Energy Saving	Display and configure the energy saving settings of	Configure
	Saving		an interface.
			Display and refresh SNMP configuration and	Monitor
		Setup	statistics information.
			Configure SNMP.	Configure
		Community	Display SNMP community information.	Monitor
			Create, modify, and delete an SNMP community.	Configure
		Group	Display SNMP group information.	Monitor
			Create, modify, and delete an SNMP group.	Configure
	SNMP
			Display SNMP user information.	Monitor
		User
			Create, modify, and delete an SNMP user.	Configure
			Display the status of the SNMP trap function and	Monitor
			information about target hosts.
		Trap
			Enable or disable the SNMP trap function; create,	Configure
			modify, and delete a target host.
		View	Display SNMP view information.	Monitor
			Create, modify, and delete an SNMP view.	Configure
	Interface	Interface	Display and clear the statistics information about	Configure
	Statistics	Statistics	an interface.

10