HP manual 227

a.Enter link aggregation interface ID 1.

b.Select Static (LACP Disabled) for the aggregate interface type.

c.Select GigabitEthernet 1/0/1, GigabitEthernet 1/0/2, and GigabitEthernet 1/0/3 on the chassis front panel.

4.Click Apply.

Figure 193 Creating static link aggregation group 1

Method 2: Create dynamic link aggregation group 1

1.From the navigation tree, select Network > Link Aggregation.

2.Click Create.

3.Configure dynamic aggregation group 1:

a.Enter link aggregation interface ID 1.

b.Select Dynamic (LACP Enabled) for aggregate interface type.

c.Select GigabitEthernet 1/0/1, GigabitEthernet 1/0/2, and GigabitEthernet 1/0/3 on the chassis front panel.

4.Click Apply.

214