Item

Description

 

 

Enable or disable the VLAN interface.

 

When errors occurred in the VLAN interface, disable the interface and then enable the

 

port to bring the port to operate correctly.

Admin status

By default, the VLAN interface is down if no Ethernet ports in the VLAN is up. The VLAN

is in the up state if one or more ports in the VLAN are up.

 

 

IMPORTANT:

 

Disabling or enabling the VLAN interface does not affect the status of the Ethernet ports in

 

the VLAN. That is, the port status does not change with the VLAN interface status.

 

DHCP

Configure how the VLAN interface obtains an IPv4 address:

 

 

• DHCP—Select the option for the VLAN interface to get an IP address

 

BOOTP

 

through DHCP.

 

 

 

 

 

 

• BOOTP—Select the option for the VLAN interface to get an IP address

Configure IPv4

Manual

through BOOTP.

• Manual—Select this option to manually specify an IPv4 address and

address

 

 

 

the mask length for the VLAN interface.

 

 

 

 

IPv4 address

Specify an IPv4 address and the mask length for the VLAN interface.

 

 

Dotted decimal notation is also allowed for the mask length field.

 

MaskLen

 

These two fields are configurable if Manual is selected.

 

 

 

 

 

 

Auto

Configure how the VLAN interface obtains an IPv6 link-local address.

 

 

• Auto—Select this option for the device to automatically generate a

 

 

 

 

link-local address based on the link-local address prefix (FE80::/64)

Configure IPv6

Manual

and the link layer address of the interface.

• Manual—Select this option to manually assign an IPv6 link-local

 

link-local address

 

address to the interface.

 

 

 

 

 

IPv6 address

Specify an IPv6 link-local address for the VLAN interface.

This field is configurable if you select Manual. The address prefix must be

 

 

FE80::/64.

 

 

Finishing configuration wizard

After finishing the management IP address configuration, click Next.

The page displays your configurations. Review the configurations and if you want to modify the settings click Back to go back to the page. Click Finish to confirm your settings and the system performs the configurations.

37