Figure 265 Configuring a default route
Verifying the configuration
1.Display the routing table.
Enter the IPv6 route page of Switch A, Switch B, and Switch C to verify that the newly configured static routes are displayed as active routes on the pages.
2.Ping Host C from Switch A:
<SwitchA> ping ipv6 3::2
PING 3::2 : 56 data bytes, press CTRL_C to break
Reply from 3::2 |
|
|
bytes=56 Sequence=1 hop limit=254 | time = 63 ms | |
Reply from 3::2 |
|
|
bytes=56 Sequence=2 hop limit=254 | time = 62 | ms |
Reply from 3::2 |
|
|
bytes=56 Sequence=3 hop limit=254 | time = 62 | ms |
Reply from 3::2 |
|
|
bytes=56 Sequence=4 hop limit=254 | time = 63 | ms |
Reply from 3::2 |
|
|
bytes=56 Sequence=5 hop limit=254 | time = 63 | ms |
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
290