HP Configuration procedures

Configuration procedures

Configuring a static aggregation group

Step Remarks

1.Creating a link aggregation group.

Create a static aggregate interface and configure member ports for the static aggregation group.

By default, no link aggregation group exists.

2. (Optional.) Displaying aggregate	Display detailed information of an existing aggregation
interface information.	group.

Configuring a dynamic aggregation group

Step	Remarks
	Create a dynamic aggregate interface and configure member ports for the
1. Creating a link	dynamic aggregation group automatically created. LACP is enabled
aggregation group.	automatically on all the member ports.
	By default, no link aggregation group exists.

2.(Optional.) Displaying

aggregate interface	Display detailed information of an existing aggregation group.
information.
3. (Optional.) Setting	Set LACP priority for the local system and link aggregation member ports.
	Changes of LACP priorities affect the aggregation state of the member ports.
LACP priority.
	The default port LACP priority and system LACP priority are both 32768.

4.(Optional.) Displaying LACP-enabled port information.

Display detailed information of LACP-enabled ports and the corresponding remote (partner) ports.

Creating a link aggregation group

1.From the navigation tree, select Network > Link Aggregation.

2.Click Create.

208