Figure 29 Device summary (a member device)

Stack configuration example

Network requirements

As shown in Figure 30, Switch A, Switch B, Switch C, and Switch D are connected to one another.

Create a stack, where Switch A is the master device, and Switch B, Switch C, and Switch D are member devices. An administrator can log in to Switch B, Switch C, and Switch D through Switch A to perform remote configurations.

Figure 30 Network diagram

Configuration procedure

1.Configure global parameters for the stack on Switch A:

a.Select Stack from the navigation tree of Switch A, and then perform the subsequent steps on the Setup tab, as shown in Figure 31.

b.Type 192.168.1.1 in the field of Private Net IP.

c.Type 255.255.255.0 in the field of Mask.

d.Select Enable from the Build Stack list.

e.Click Apply.

43