ItemDescription

Enable Outbound Restriction

Specifies whether to enable outbound traffic control, and selects a control method.

Available control methods:

•Only MAC-Known Unicasts—Allows only unicast frames with their destination MAC addresses being authenticated to pass through.

•Only Broadcasts and MAC-Known Unicasts—Allows only broadcast and unicast packets with their destination MAC addresses being authenticated to pass through.

•Only Broadcasts, Multicasts, and MAC-Known Unicasts—Allows only broadcast, multicast, and known unicast packets with their destination MAC addresses being authenticated to pass through.

Configuring secure MAC addresses

1.From the navigation tree, select Authentication > Port Security. The Port Security page appears.

2.In the Security Ports And Secure MAC Address List area, click Secure MAC Address List.

The secure MAC address configuration area displays the secure MAC addresses that have been learned or configured.

Figure 413 Secure MAC address list

3.Click Add.

The page for adding a secure MAC address appears. Figure 414 Adding secure MAC address

4.Configure a secure MAC address as described in Table 128.

5.Click Apply.

427