c.Select the authentication method CHAP.
d.Click Apply.
Figure 331 Configuring 802.1X globally
2.Configure 802.1X for GigabitEthernet 1/0/1:
a.In the Ports With 802.1X Enabled area, click Add.
b.Select GigabitEthernet1/0/1 from the Port list.
c.Click Apply.
Figure 332 Configuring 802.1X for GigabitEthernet 1/0/1
Verifying the configuration
After the user passes authentication and gets online, use the ping command to test whether ACL 3000 takes effect.
1.From the navigation tree, select Network > Diagnostic Tools. The ping page appears.
2.Enter the destination IP address 10.0.0.1.
3.Click Start.
350