Figure 31 Configuring global parameters for the stack on Switch A
Switch A becomes the master device.
2.Configure a stack port on Switch A:
a.In the Port Settings area on the Setup tab, select GigabitEthernet1/0/1.
b.Click Enable.
Figure 32 Configuring a stack port on Switch A
3.On Switch B, configure GigabitEthernet 1/0/2 (connected to Switch A), GigabitEthernet 1/0/1 (connected to Switch C), and GigabitEthernet 1/0/3 (connected to Switch D) as stack ports:
a.Select Stack from the navigation tree of Switch B.
b.In the Port Settings area on the Setup tab, select GigabitEthernet1/0/1, GigabitEthernet1/0/2, and GigabitEthernet1/0/3.
c.Click Enable.
44