Figure 201 The global setup tab
3.Set the global LLDP setup as described in Table 76.
4.Click Apply.
A progress dialog box appears.
5.Click Close on the progress dialog box when the progress dialog box prompts that the configuration succeeds.
Table 76 Configuration items
Item | Description | |
LLDP Enable | Select from the list to enable or disable global LLDP. | |
|
| |
| Select from the list to enable or disable CDP compatibility of LLDP. | |
| When you configure CDP compatibility, follow these guidelines: | |
| • To enable LLDP to be compatible with CDP on a port, you must set the CDP | |
CDP Compatibility | operating mode on the port to TxRx and enable CDP compatibility on the | |
Global Setup tab. | ||
| • Because the maximum TTL allowed by CDP is 255 seconds, you must make | |
| sure the product of the TTL multiplier and the LLDP frame transmission | |
| interval is less than 255 seconds for | |
| with Cisco IP phones. | |
|
| |
Fast LLDPDU Count | Set the number of LLDP frames sent each time fast LLDP frame transmission is | |
triggered. | ||
| ||
|
|
228