3.Enable the DHCP relay agent on VLAN-interface 1:

a.In the Interface Config field, click the icon of VLAN-interface 1, and then perform the following operations, as shown in Figure 282.

b.Select the Enable option next to DHCP Relay.

c.Select 1 for Server Group ID.

d.Click Apply.

Figure 282 Enabling the DHCP relay agent on an interface and correlate it with a server group

Because the DHCP relay agent and server are on different subnets, you need to configure a static route or dynamic routing protocol to make them reachable to each other.

305