Table 159 Configuration items

Item

 

Description

 

 

Enable or disable the WRR queue scheduling mechanism on selected ports. The

 

WRR

following options are available:

 

• Enable—Enables WRR on selected ports.

 

 

 

 

• Not Set—Restores the default queuing algorithm on selected ports.

 

 

 

WRR Setup

Queue

Select the queue to be configured.

The value range for a queue ID is 0 to 7.

 

 

 

 

Specify the group the current queue is to be assigned to.

 

This list is available after you select a queue ID. The following groups are available

Group

for selection:

 

• SP—Assigns a queue to the SP group.

 

• 1—Assigns a queue to WRR group 1.

 

 

Weight

Set a weight for the current queue.

This list is available when group 1 is selected.

 

 

 

Please select port(s)

Click to select ports to be configured with queuing on the chassis front panel.

 

 

Configuring rate limit on a port

1.Select QoS > Line rate from the navigation tree.

2.Click the Setup tab to enter the rate limit configuration page. Figure 472 Configuring rate limit on a port

3.Configure rate limit on a port as described in Table 160.

4.Click Apply.

Table 160 Configuration items

ItemDescription

Please select an interface type Select the types of interfaces to be configured with rate limit.

486