HP manual 245

Field	Description
	Port ID type:
	•	Interface alias.
	•	Port component.
	•	MAC address.
Port ID type	•	Network address.
	•	Interface name.
	•	Agent circuit ID.
	• Locally assigned—Locally-defined port ID type other than those listed
		above.
Port ID	Port ID value.
	Capabilities supported on the system:
System capabilities supported	•	Repeater.
	•	Bridge.
	•	Router.
	Capabilities enabled on the system:
System capabilities enabled	•	Repeater.
	•	Bridge.
	•	Router.
Auto-negotiation supported	Indicates whether autonegotiation is supported on the port.
Auto-negotiation enabled	Indicates whether autonegotiation is enabled on the port.
OperMau	Speed and duplex state on the port.
Link aggregation supported	Indicates whether link aggregation is supported.
Link aggregation enabled	Indicates whether link aggregation is enabled.
Aggregation port ID	Link aggregation group ID. It is 0 if the neighbor port is not assigned to
	any link aggregation group.
Maximum frame Size	Maximum frame size supported on the neighbor port.
	MED device class:

• Connectivity device—An intermediate device that provide network

	connectivity.
	• Class I—A generic endpoint device. All endpoints that require the
	discovery service of LLDP belong to this category.
Device class	• Class II—A media endpoint device. The class II endpoint devices
	support the media stream capabilities and the capabilities of generic
	endpoint devices.
	• Class III—A communication endpoint device. The class III endpoint
	devices directly support end users of the IP communication system.
	Providing all capabilities of generic and media endpoint devices,
	Class III endpoint devices are used directly by end users.

232