HP manual 97

3.Enter 1 for Mirroring Group ID, and select Local from the Type list.

4.Click Apply.

Configuring GigabitEthernet 1/0/1 and GigabitEthernet 1/0/2 as the source ports

1.Click Modify Port.

2.Select 1 – Local from the Mirroring Group ID list.

3.Select Mirror Port from the Port Type list.

4.Select both from the Stream Orientation list.

5.Select 1 (GigabitEthernet 1/0/1) and 2 (GigabitEthernet 1/0/2) on the chassis front panel. Figure 70 Configuring the source ports

6.Click Apply.

A configuration progress dialog box appears.

7.After the success notification appears, click Close.

Configuring GigabitEthernet 1/0/3 as the monitor port

1.Click Modify Port.

2.Select 1 – Local from the Mirroring Group ID list.

3.Select Monitor Port from the Port Type list.

4.Select 3 (GigabitEthernet 1/0/3) on the chassis front panel.

84