Creating a static ARP entry
1.From the navigation tree, select Network > ARP Management. The default ARP Table page appears, as shown in Figure 218.
2.Click Add.
The New Static ARP Entry page appears. Figure 219 Add a static ARP entry
3.Configure the static ARP entry as described in Table 80.
4.Click Apply.
Table 80 Configuration items
Item |
| Description |
IP Address |
| Enter an IP address for the static ARP entry. |
|
| |
MAC Address | Enter a MAC address for the static ARP entry. | |
|
|
|
| VLAN ID | Enter a VLAN ID and specify a port for the static ARP entry. |
Advanced |
| IMPORTANT: |
| ||
Options | Port | The VLAN ID must be the ID of the VLAN that has already been created, and the port |
| ||
|
| |
must belong to the VLAN. The corresponding VLAN interface must have been created.
Removing ARP entries1.From the navigation tree, select Network > ARP Management. The default ARP Table page appears, as shown in Figure 218.
2.Remove ARP entries:
{To remove specific ARP entries, select the boxes of target ARP entries, and click Del Selected.
{To remove all static and dynamic ARP entries, click Delete Static and Dynamic.
{To remove all static ARP entries, click Delete Static.
{To remove all dynamic ARP entries, click Delete Dynamic.
245