Figure 364 Local user configuration page
3.Configure the local user as described in Table 118.
4.Click Apply.
Table 118 Configuration items
Item | Description | |
Username | Specify a name for the local user. | |
|
| |
Password | Specify and confirm the password of the local user. | |
The settings of these two fields must be the same. | ||
Confirm | ||
Do not specify a password starting with spaces because the spaces will be ignored. | ||
| ||
|
| |
Password Encryption | Select a password encryption method: Reversible or Irreversible. | |
|
| |
Group | Select a user group for the local user. | |
For information about user group configuration, see "Configuring a user group." | ||
| ||
|
| |
| Select a user type for the local user: Common User, Security Log Administrator, or | |
Guest Administrator. | ||
| Only the Common User option takes effect on this software version. | |
|
| |
| Select an authorization level for the local user: Visitor, Monitor, Configure, or | |
Level | Management, in ascending order of priority. | |
| This option takes effect on only Web, FTP, Telnet, and SSH users. | |
|
| |
| Select the service types for the local user to use, including Web, FTP, Telnet, LAN | |
| access (Ethernet access service such as 802.1X), and SSH. | |
If you do not specify any service type for a local user who uses local authentication, | ||
| the user cannot pass authentication and therefore cannot log in. | |
| The service type of the guest administrator and security log administrator is Web. | |
|
| |
| 381 |