Item

Description

 

Set unicast suppression on the port:

 

• ratio—Sets the maximum percentage of unicast traffic to the total bandwidth of an

 

Ethernet port. When you select this option, you must enter a percentage in the box

 

below.

Unicast

• pps—Sets the maximum number of unicast packets that can be forwarded on an

Suppression

Ethernet port per second. When you select this option, you must enter a number in the

 

box below.

 

• kbps—Sets the maximum number of kilobits of unicast traffic that can be forwarded on

 

an Ethernet port per second. When you select this option, you must enter a number in

 

the box below.

 

 

 

Interface or interfaces that you have selected from the chassis front panel and the

Selected Ports

aggregate interface list below, for which you have set operation parameters.

 

You can set only the state and MAC learning limit for an aggregate interface.

If you set operation parameters that a port does not support, you are notified of invalid settings and might fail to set the supported operation parameters for the port or other ports.

Displaying port operation parameters

Displaying a specified operation parameter for all ports

1.Select Device > Port Management from the navigation tree. The Summary page appears by default.

2.Select the option for a parameter you want to view.

The parameter information for all the ports is displayed in the lower part of the page.

73