Figure 67 Modifying ports

3.Configure ports for the mirroring group as described in Table 17.

4.Click Apply.

A progress dialog box appears.

5.After the success notification appears, click Close.

Table 17 Configuration items

Item

Description

Mirroring

ID of the mirroring group to be configured.

The available groups were added previously.

Group ID

Select a Local mirroring group ID to configure ports for the local mirroring group.

 

 

 

 

Configure ports for a local mirroring group:

Port Type

• Monitor Port—Configures the monitor ports for the local mirroring group.

 

• Mirror Port—Configures mirroring ports for the local mirroring group.

 

 

 

Set the direction of the traffic monitored by the monitor port of the mirroring group:

Stream

• both—Mirrors both received and sent packets on mirroring ports.

Orientation

• inbound—Mirrors only packets received by mirroring port.

 

• outbound—Mirrors only packets sent by mirroring ports.

 

 

 

Click the ports to be configured on the chassis front panel. If aggregate interfaces are

Select port(s)

configured on the device, the page displays a list of aggregate interfaces below the chassis

front panel. You can select aggregate interfaces from this list and configure them as

 

 

mirroring ports of a port mirroring group.

 

 

82