Creating an IPv4 static route

1.Select Network > IPv4 Routing from the navigation tree.

2.Click the Create tab.

The page for configuring an IPv4 static route appears. Figure 255 Creating an IPv4 static route

3.Create an IPv4 static route as described in Table 91.

4.Click Apply.

Table 91 Configuration items

Item

Description

Destination IP Address

Enter the destination host or network IP address in dotted decimal notation.

 

 

Mask

Enter the mask of the destination IP address.

You can enter a mask length or a mask in dotted decimal notation.

 

 

 

 

Set a preference value for the static route. The smaller the number, the higher the

 

preference.

Preference

For example, specifying the same preference for multiple static routes to the same

 

destination enables load sharing on the routes. Specifying different preferences

 

enables route backup.

 

 

Next Hop

Enter the next hop IP address in dotted decimal notation.

 

 

 

280