Figure 119 Enabling SNMP traps
5.Configure a target host SNMP traps:
a.Click Add on the Trap tab page.
The page for adding a target host of SNMP traps appears.
b.Select the IPv4/Domain option and type 1.1.1.2 in the following field, type public in the Security Name field, and select v1 from the Security Model list.
c.Click Apply.
Figure 120 Adding a trap target host
Configuring the NMS
The configuration on the NMS must be consistent with that on the agent. Otherwise, you cannot perform corresponding operations.
To configure the NMS:
1.Configure the SNMP version for the NMS as v1 or v2c.
2.Create a
3.Create a read and write community and name it private.
126