Voice VLAN configuration examples

Configuring voice VLAN on a port in automatic voice VLAN assignment mode

Network requirements

As shown in Figure 153:

•Configure VLAN 2 as the voice VLAN allowing only voice traffic to pass through.

•The IP phone connected to hybrid port GigabitEthernet 1/0/1 sends untagged voice traffic.

•GigabitEthernet 1/0/1 operates in automatic VLAN assignment mode. Set the voice VLAN aging timer to 30 minutes.

•Configure GigabitEthernet 1/0/1 to allow voice packets whose source MAC addresses match the OUI addresses specified by OUI address 0011-2200-0000 and mask ffff-ff00-0000. The description of the OUI address entry is test.

Figure 153 Network diagram

Configuring Switch A

1.Create VLAN 2:

a.Select Network > VLAN from the navigation tree.

b.Click the Create tab.

c.Enter VLAN ID 2.

d.Click Create.

163