Figure 146 Creating a VLAN interface
3.Configure the VLAN interface as described in Table 43.
4.Click Apply.
Table 43 Configuration items
Item |
| Description |
| |
Input a VLAN ID: | Enter the ID of the VLAN interface to be created. Before creating a VLAN interface, | |||
make sure the corresponding VLAN exists. |
| |||
|
|
| ||
|
|
|
| |
| DHCP | Configure the way in which the VLAN interface gets an IPv4 address. |
| |
|
| Allow the VLAN interface to get an IP address automatically by |
| |
| BOOTP |
| ||
|
| selecting the DHCP or BOOTP option. Otherwise, select the Manual |
| |
|
|
| ||
|
| option to manually assign the VLAN interface an IP address. | These items | |
|
| After a VLAN interface fails to get an IP address through DHCP | ||
Configure | Manual | are available | ||
| multiple times, the device stops IP address application and configures | after you | ||
Primary |
| |||
| the default IP address for the interface. | select the | ||
IPv4 |
| |||
|
| Configure | ||
|
| |||
Address | IPv4 | Configure an IPv4 address for the VLAN interface. | ||
Primary IPv4 | ||||
| Address | This field is available after you select the Manual option. | ||
| Address box. | |||
Mask | Set the subnet mask length (or enter a mask in dotted decimal | |
notation format). | ||
Length | ||
This field is available after you select the Manual option. | ||
| ||
|
|
151