HP Setting LLDP parameters on ports

Setting LLDP parameters on ports

The Web interface allows you to set LLDP parameters for a single port or for multiple ports in batch.

Setting LLDP parameters for a single port

1.From the navigation tree, select Network > LLDP. By default, the Port Setup tab is displayed.

2.Click the icon for the port.

On the page as shown in Figure 199, the LLDP settings of the port are displayed. Figure 199 Modifying LLDP settings on a port

3.Configure the LLDP parameters for the port as described in Table 75.

4.Click Apply.

A progress dialog box appears.

5.Click Close on the progress dialog box when the progress dialog box prompts that the configuration succeeds.

Table 75 Configuration items

Item		Description
Interface Name		Displays the name of the port or ports you are configuring.
DLDP State		Displays the LLDP enabling status on the port you are configuring.
		This field is not available when you batch-configure ports.
		Set the LLDP operating mode on the port or ports you are
		configuring:
Basic	LLDP Operating Mode	• TxRx—Sends and receives LLDP frames.
Settings		• Tx—Sends but does not receive LLDP frames.

• Rx—Receives but not does not send LLDP frames.

• Disable—Neither sends nor receives LLDP frames.

224