HP Displaying SNMP packet statistics

Item	Description
Security Name	Set the security name, which can be an SNMPv1 community name, an
	SNMPv2c community name, or an SNMPv3 user name.
	Set UDP port number.
	IMPORTANT:
UDP Port	The default port number is 162, which is the SNMP-specified port used for
	receiving traps on the NMS. Generally (such as using IMC or MIB Browser as the
	NMS), you can use the default port number. To change this parameter to another
	value, you need to make sure the configuration is the same with that on the NMS.
	Select the security model, for which you must set the SNMP version. For the
Security Model	NMS to receive notifications, make sure the SNMP version is the same with that
	on the NMS.
	Set the authentication and privacy mode for SNMP traps when the security
	model is selected as v3. The available security levels are: no authentication no
Security Level	privacy, authentication but no privacy, and authentication and privacy.
	When the security model is selected as v1 or v2c, the security level is no
	authentication no privacy, and cannot be modified.

Displaying SNMP packet statistics

Select Device > SNMP from the navigation tree.

The page for displaying SNMP packet statistics appears.

Figure 114 SNMP packet statistics

123