1.Select Network > Service from the navigation tree to enter the service management configuration page, as shown in Figure 293.
Figure 293 Service management
2.Enable or disable services on the page. Table 102 describes the detailed configuration items.
3.Click Apply.
Table 102 Configuration items
Item |
| Description | |
| Enable FTP | Enable or disable the FTP service. | |
| service | The FTP service is disabled by default. | |
|
|
| |
FTP |
| Associate the FTP service with an ACL. Only the clients that pass the ACL | |
| ACL | filtering are permitted to use the FTP service. | |
| You can view this configuration item by clicking the expanding button in | ||
|
| ||
|
| front of FTP. | |
|
|
| |
Telnet | Enable Telnet | Enable or disable the Telnet service. | |
service | The Telnet service is disabled by default. | ||
| |||
|
|
| |
SSH | Enable SSH | Enable or disable the SSH service. | |
service | The SSH service is disabled by default. | ||
| |||
|
|
| |
|
| Enable or disable the SFTP service. | |
SFTP | Enable SFTP | The SFTP service is disabled by default. | |
service | IMPORTANT: | ||
| |||
|
| ||
|
| When you enable the SFTP service, the SSH service must be enabled. | |
HTTP | Enable HTTP | Enable or disable the HTTP service. | |
service | The HTTP service is enabled by default. | ||
| |||
|
|
|
315