HP 2400 2450 (Q3090A-Japan only), 2400 2420 (Q3085A) load the input tray, load originals & paper

Models: 2400 2410xi (Q3088A)

1 166
Download 166 pages 62.29 Kb
Page 23
Image 23
load the input tray

load originals and load paper

load the input tray

1Remove the output tray, and slide the paper-width and paper-length guides to their outermost positions.

2Tap a stack of paper on a flat surface to align the edges, and then check to make sure all of the paper in the stack is the same size and type.

3Slide the short edge of the paper forward into the input tray with the print side down until it stops. If you are using letterhead, insert the top of the page first with the print side down.

4Slide the paper-width and paper-length guides inward until they stop at the edges of the paper. Make sure that the paper stack lies flat in the input tray and is stacked no higher than the paper-length guide.

load originals & paper

5Replace the output tray.

reference guide

13

Page 23
Image 23
HP 2400 2450 (Q3090A-Japan only), 2400 2420 (Q3085A), 2400 2410xi (Q3088A) manual load the input tray, load originals & paper